BenQ PD Series User Manual page 12

Orient and align the stand base socket with the end of
the stand arm, then push them together.
Raise the thumbscrew lid and tighten the thumbscrew
as illustrated. Then push the lid back.
Gently attempt to pull them back apart to check that
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You might want to adjust the monitor stand height. See
Adjusting the monitor height on page 17
information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
Your monitor is an edge to edge monitor and should be
handled with care. Adjust the screen angle by placing your
hands on the top and on the bottom of the monitor as
illustrated. Excessive force on the display is prohibited.
12 How to assemble your monitor hardware when
for more
2
3
1