- The waypoint is saved to your waypoint list. This waypoint
name is prefixed with MOB AIS SART - followed by the unique
MMSI number of the SART. For example, MOB AIS SART -
12345678.
•
Activate the MOB function
- The display switches to a zoomed chart panel, centered on the
AIS SART position
- The system creates an active route to the AIS SART position
Ú Note:
If the MOB function is already active, this will be
terminated and replaced by the new route towards the AIS
SART position!
Ú Note:
If the AIS stops receiving the AIS SART message, the AIS
SART remains in the Vessels list for 10 minutes after it receives
the last signal.
If you select the AIS SART icon on the chart panel, then you can see
the AIS MOB details.
Vessel alarms
You can define several alarms to alert you if a target shows up
within predefined range limits, or if a previously identified target is
lost.
AIS
| HDS Carbon Operator Manual
149