Lowrance HDS Carbon Quick Start Manual page 122

114
Changing set heading in AUTO mode
You adjust the set heading by using the port and starboard (1 or 10
degrees) arrow buttons in the Autopilot Controller.
When you select the button, an immediate heading change takes
place. The new heading is maintained until a new heading is set or
until you select another mode for the autopilot.
Turn pattern steering
The autopilot includes a number of automatic turn steering features
when the autopilot is in AUTO mode.
Ú Note:
Turn pattern steering for outboard motors uses heading
information only, while turn pattern steering for the trolling
motor uses both GPS and heading information. Therefore, with
outboard turn pattern steering, waypoints in the turns are not
created and displayed as they are with trolling motor turn
patterns.
Initiating a turn
You start the turn by selecting the relevant turn icon, followed by
selecting the port or starboard options in the turn dialog to select
the turn direction.
Stopping the turn
You can stop the turn from within the turn dialog.
At any time during a turn you can select Autopilot standby in the
System Controls dialog to return to STBY mode and manual
steering.
Turn variables
The turn steering options have settings that you can adjust before
you start a turn and at any time when the boat is in a turn.
U-turn
U-Turn changes the current set heading to be 180° in the opposite
direction.
The turn rate is identical to Rate limit settings. This cannot be
changed during the turn.
C-turn
Steers the vessel in a circle.
Outboard motor autopilot
Manual
| HDS Carbon Operator