Circuit Protection - Kohler 4CKM Operation And Installation Manual

Circuit Protection

AC Circuit Breaker(s)— will trip when a fault is detected
in the AC output
4— Troubleshooting to determine cause of fault. After
fault is corrected, reset AC circuit breaker by placing in
" ON"position.
Input (Controller) Fuse (15 Amp)— indicates a fault in
the controller circuit. See Section 4— Troubleshooting.
After fault is corrected, fuse must be replaced. Unit is
now ready to be restarted.
2-2 Operation
circuit. See Section
Voltage Regulator Fuse (5 Amp)— Indicates a fault in
the voltage regulator and/or generator circuit. After fault
is corrected, replace fuse. Voltage regulator circuit is
now functional.
De-Icing Module Fuse (5 Amp) (on gasoline-fueled
units)— Indicates a fault in the de-icing circuit. After
fault is corrected, replace fuse.
Battery Charging Circuit Breaker (25 Amp) (on units
equipped with battery charging)— indicates a fault in
the battery charging circuit. Breaker will automatically
reset.
TP-5393 9/93