Table of Contents
Advertisement
Setup menu list (continued)
SW&DISP SETUP screen
Display
Item
mode
IRIS DIAL
CAMERA
PHOTO
USER1 SW
CAMERA
PHOTO
PB
USER2 SW
CAMERA
PHOTO
PB
USER3 SW
CAMERA
PHOTO
PB
INDICATOR
PB
FOCUS
CAMERA
ASSIST SW
PHOTO
RING SW
CAMERA
PHOTO
AUTO SW
CAMERA
PHOTO
: Can also be configured in Quick Menu. (Page 96)
106
AG-HMC41E(VQT2H31(E))̲E.indb 106
AG-HMC41E(VQT2H31(E))̲E.indb 106
Q.MENU
Sets the rotation direction and the aperture control of the IRIS dial. (In
MANUAL IRIS mode)
DOWN OPEN:
The iris opens when the IRIS dial is turned
downward.
UP OPEN:
The iris opens when the IRIS dial is turned upward.
Selects the function assigned to the USER1 button.
INH:
No function assigned.
(PUSH)AF:
Switches to auto focus mode when the button is held
during manual focus mode.
BACKLIGHT:
Auto iris control for the backlight compensation.
(Page 47)
SPOTLIGHT:
Switches auto iris control for the spotlight on or off.
BLACKFADE:
Blackfade (Page 46)
WHITEFADE:
Whitefade (Page 46)
ATW:
Switches the ATW function on or off.
ATW LOCK:
Fixes the white balance value when the button is
pressed during ATW. Press again to perform ATW.
HIGH GAIN:
The gain mode switches between normal and high
with each press of the button. Gain can be set to up
to 34 dB in high gain mode. (Page 41)
D.ZOOM:
Changes the ratio of the DIGITAL ZOOM function.
Each press of the button changes the ratio in the
following order: OFF (x1) → x2 → x5 → x10 → OFF
(x1). (Page 38)
EVF DTL:
Emphasizes outlines of images in the LCD monitor
and viewfinder for easier focusing when the button is
pressed.
SHOT MARK:
Shot mark recording (Page 47)
LAST CLIP:
Deletes the last recorded clip. (Page 49)
WFM:
Displays a waveform on the LCD monitor (only
during CAMERA mode).
Assigns a function to the USER2 button.
The setting contents are the same as USER1 SW.
BACKLIGHT
Assigns a function to the USER3 button.
The setting contents are the same as USER1 SW.
SHOT MARK
Selects whether to display the thumbnail indicator.
ON:
Displayed
OFF:
Not displayed
Assigns a function to the FOCUS ASSIST button.
EXPANDED: Displays the center of the screen in expanded view.
BAR:
A bar extends to the right as focus is aligned.
BOTH:
Enables both expanded view and focus bar display.
Assigns a function to the RING switch.
ZOOM: Switch between FOCUS and ZOOM.
IRIS:
Switch between FOCUS and IRIS.
Sets the face detection function during auto mode to ON or OFF.
A
: Enables face detection.
O N
A
: Disables face detection.
OFF
Description of settings
indicates the factory setting.
2009/07/11 18:42:31
2009/07/11 18:42:31
Advertisement
Table of Contents
