Enabling Or Disabling Wi-Fi; Clearing Your Wi-Fi Settings; Troubleshooting - Dyson pure hot + cool link Operating Manual

Enabling or Disabling Wi-Fi

Wi-Fi can be enabled or disabled by pressing and holding the ON/ OFF button
10-20 secs
on the appliance for between 10 and 20 seconds.
Wi-Fi disabled
If Wi-Fi is disabled, the appliance will not connect to the Dyson Link app.

Clearing your Wi-Fi settings

21 secs It is possible to remove your network details from the appliance.
Press and hold the ON/ OFF button
on the appliance for longer than 20
seconds.
If you clear your network settings the appliance will not connect to the Dyson Link app.

Troubleshooting

If you see a flashing 'E' when trying
to use the appliance, it is unable to do
what has been requested.
Make sure you have checked the following:
The room temperature is above 5°C.
There are no blockages in the inlet grille or loop amplifier outlet.
The filter has been correctly assembled and doesn't need to be replaced.
The appliance is correctly plugged in directly to the wall outlet.
If the message still displays, unplug and leave for 10 seconds before turning
on again. If the problem persists, please call the Dyson Helpline.
12
Wi-Fi enabled
The Wi-Fi symbol will flash alternately between
white and green to indicate that your network
details have been removed.
If you see a solid 'E' when trying to use
the appliance, it shows the appliance
has stopped functioning correctly.
Solid
white = Wi-Fi connected
Flashing
white = Wi-Fi connecting
Flashing Wi-Fi is ready to connect
to your Dyson Link app
green =
Off = Wi-Fi disabled