Clearing Your Wi-Fi Settings; Enabling Or Disabling Wi-Fi; Troubleshooting - Dyson Pure Cool Link DP01 Operating Manual

Clearing your Wi-Fi settings

It is possible to remove your network details from the machine.
Press and hold the ON/ OFF button on the
machine for longer than 20 seconds.
If you clear your network settings the machine will not connect to the Dyson Link app.

Enabling or Disabling Wi-Fi

Wi-Fi can be enabled or disabled by pressing and holding the ON/OFF button
on the machine for between 10 and 20 seconds.
Wi-Fi disabled
If Wi-Fi is disabled, the machine will not connect to the Dyson Link app.

Troubleshooting

If you see a flashing 'E' when trying to use
the machine, it is unable to do what has
been requested.
Make sure you have checked the following:
The room temperature is above 5°C/ 41°F.
There are no blockages in the inlet grille or loop amplifier outlet.
The filter has been correctly assembled and doesn't need to be replaced.
The machine is correctly plugged in directly to the wall outlet.
If the message still displays, unplug and leave for 10 seconds before turning on again.
If the problem persists, please call the Dyson Helpline.
10
The Wi-Fi symbol will flash alternately between
white and green to indicate that your network
details have been removed.
Wi-Fi enabled
If you see a solid 'E' when trying to use the
machine, it shows the machine has stopped
functioning correctly.
Solid white = Wi-Fi connected
Flashing white = Wi-Fi connecting
Flashing green = Wi-Fi is ready to
connect to your Dyson Link app
Off = Wi-Fi disabled