Night Mode; Oscillation; Airflow Speed Control; Diffused And Focused Modes - Dyson pure hot + cool link Operating Manual

Night mode

The night mode will dim the display and run quietly, making it ideal for use while sleeping.
When night mode is enabled (indicated by an illuminated
half moon symbol in the bottom right corner of the display),
the display will dim and after 5 seconds will fade to off.
The half moon symbol remains illuminated.
If the appliance is not in auto mode, the airflow speed will reduce to level 4. When night mode is activated, if it is already
below level 4, it will remain the same. This can be manually changed if desired. The display will illuminate briefly, then fade
as before. If in auto mode the airflow speed will be reduced automatically.

Oscillation

Diffused and focused modes

8
Oscillation control
To start the appliance
oscillating, press the
oscillation control button.
To stop the appliance
oscillating, press it again.
The appliance will not
oscillate when the control
buttons are pressed.
Diffused mode
Press the wide angle button
to change from a personal
directed airflow to a whole
room airflow.
Heating and cooling modes
work in this mode.
5 secs

Airflow speed control

Airflow speed control
To change the airflow speed
press the airflow control
button. The digital display
will show the new fan speed.
If in heater mode after
2.5 seconds it will change
back to displaying the target
temperature.
Focused mode
Press the narrow angle button
to change from a whole room
airflow to a personal directed
airflow.
Heating and cooling modes
work in this mode.