Welted Buttonhole - Janome Memory Craft 4900 QC Instruction Book

⁄0
e
t
⁄1
t
⁄2
y
⁄3
y
⁄4
y
t
⁄0 The patch should be cut 1 to 1.5 cm (7/16˝ – 10/16˝)
away from the hole. The corners should be cut rounded
off as shown.
r
e Right side of patch
r Wrong side of garment fabric
⁄1 Place the facing on the wrong side of the garment
fabric. Mark the 4 corners with pins as shown.
t Facing
y
y Garment fabric
⁄2 Turn all the layers over and cut the buttonhole opening
on the facing in the same way as step c.
Four marker pins show you the corner points on the
facing. Fold back each flap between the facing and
patch.
t Facing
y Garment fabric
⁄3 Stitch around the opening with a needle and thread as
shown.
t Facing
y Garment fabric
⁄4 Welted buttonhole is complete.
y Garment fabric
98