Panasonic TH-42PH10EK Operating Instructions Manual page 44

Options Adjustments
(For TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK)
1
2
3
4
5
6
Item Effect
Weekly
Command
Timer
Onscreen
display
On Off
Initial INPUT
44
Press to display the Setup menu.
Press to select "OSD Language".
Press and hold until the Options menu is displayed.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from
Options menu.
Sets Weekly Command Timer. (see page 48)
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Off PC INPUT1
Adjusts the input signal when the unit is turned on.
Notes:
• Only the adjusted signal is displayed. (see page 13).
• Signal can be displayed when the Terminal board is installed.
• This menu is available only when "INPUT lock" is "Off".
• When a dual input terminal board is attached, A or B is displayed depending on the selected
input signal. (Ex. INPUT1A, INPUT1B)
Adjustments
was pressed.
INPUT2 INPUT3
Options
Weekly Command Timer
On
Onscreen display
Initial INPUT O f f
Initial VOL level Off
Maximum VOL level Off
INPUT lock Off
Button lock Off
Remocon User level Off
Advanced PIP Off
1/3
0
0