Power On / Off - Panasonic TH-42PH10EK Operating Instructions Manual

Power On / Off

Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma
Display with the clamper. (see page 8)
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The power plug shown
at right may, therefore, not be the type fi tted to your set.
• When disconnecting the AC cord, be absolutely sure to
disconnect the AC cord plug at the socket outlet fi rst.
Press the Power switch on the Plasma Display to turn the set
on: Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after the
Plasma Display is turned on (setting condition is an
example).
When the Power is turned on for the fi rst
time, the Language selection screen is
displayed.
From the second time on, language
selection can be done from the setup
menu. (see page 13)
Select the desired language using the
or button and press the ACTION ( )
button.
Note:
Set with the remote control. Buttons on the
main unit are unavailable for this setting.
Press the
Power Indicator: Red (standby)
Press the
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the
unit, when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
12
OSD Language
button on the remote control to turn the Plasma Display off.
button on the remote control to turn the Plasma Display on.
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
Select Set
TH-42PS9
+
INPUT MENU -/ VOL / ENTER/
Power Indicator
Remote Control
Sensor
From the second time on, the below
screen is displayed for a while (setting
condition is an example).
switch on the
PC
16:9