Initial Selections; Selecting The Input Signal; Selecting The On-Screen Menu Language - Panasonic TH-42PH10EK Operating Instructions Manual

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Input terminal will not be selected if the terminal board is not installed into the
SLOT.
• Select to match the signals from the source connected to the component/RGB input
terminals. (see page 38)
• In 2 screen display, the same input mode cannot be selected for the main picture
and sub picture.

Selecting the On-Screen Menu Language

Press to select the input signal to be played back from
the equipment which has been connected to the Plasma
Display.
Input signals will change as follow:
• TH-42PS10EK/S
INPUT1
• TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK
INPUT1A
SLOT1 is for dual input so that you can select INPUT1A
or INPUT1B for INPUT1.
INPUT1A : VIDEO signal terminal in SLOT1
INPUT1B : S-VIDEO signal terminal in SLOT1
Press to display the Setup menu.
Press to select the OSD Language.
Press to select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
INPUT2 INPUT3
INPUT1B INPUT2
Español
ENGLISH(US)
.......(Chinese)
.......(Japanese)
PC
INPUT3 PC
TH-42PS9
+
INPUT MENU -/ VOL / ENTER/
INPUT MENU
Setup
Signal
Component/RGB-in select
Input label
Power save
Standby save
Power management
Auto power off
OSD Language
+
-/ VOL / ENTER/
1/2
RGB
PC
Off
Off
Off
Off
English ( UK )
13