Adjusting Pos. / Size - Panasonic TH-42PH10EK Operating Instructions Manual

Adjusting Pos. / Size

1
2
3
4
Notes:
• Adjustment details are memorized separately for different input signal formats
(Adjustments for component signals are memorized for 525 (480) / 60i · 60p,
625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250
(1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are
memorized for each frequency.)
• If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture
position will shift up or down. This picture position movement cannot be
controlled by the Picture Pos./Size function.
• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, the
adjustment is not memorized. When exiting the mode, the screen will return
to a former adjustment.
H-Pos Adjust the horizontal position.
V-Pos Adjust the vertical position.
Clock Phase
(RGB/PC in mode)
Helpful Hint (
While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
Press to display the Pos. /Size menu.
Press to select H-Pos / H-Size / V-Pos / V-Size /
Clock Phase.
Press to adjust Pos. / Size.
Press to exit from adjust mode.
Eliminate the fl ickering and distortion.
/ Normalisation)
Normalise
During "AV(S Video)", "Component"
and "Digital" input signal.
Pos. /Size
During "RGB / PC" input signal.
Pos. /Size
H-Size Adjust the horizontal size.
V-Size Adjust the vertical size.
Normalise
Normal
0
H-Pos
0
H-Size
0
V-Pos
0
V-Size
Normalise
Normal
0
H-Pos
0
H-Size
0
V-Pos
0
V-Size
0
Clock Phase
19