TRENDnet TV-IP762IC User Manual page 35

TRENDnet User's Guide
Action
Video Clip
 Click the checkbox to enable this feature. Select the trigger recording action
from the drop-down list. Select between Always, Motion, or Schedule. For the
Video Clip type select the source, File Format, Pre-event Recording time, the
Maximum duration and select the Target. The Target can either be FTP or Email.
With FTP you will need to enter the FTP server, username, password,
path/directory, filename prefix, interval, check Passive Mode and Apply to save.
If you would like to test the service click the Test button to see if it can connect
the FTP server. Alternatively, set the target as Email. With Email, enter the
recipient email address, SMTP Mail Server, the port number (default is 25),
enter the username, password, Sender's email, interval (600 seconds is default),
and SSL/TLS parameters from the drop-down list. Select from either SSL-TLS or
STARTTLS. Click the Test button to test the data entered. Click Apply once the
settings are acceptable.
© Copyright 2012 TRENDnet. All Rights Reserved.
Action
Snapshot
 Snapshot takes an instant photo of an event the camera is recording. To take a
snapshot of the camera recording, click the checkbox to enable Snapshot.
Select the trigger recording action from the drop-down list. Select between
Always, Motion, or Schedule from the Trigger drop-down menu. The Snapshot
Type works only for one camera profile. This profile can be configured under
Video and Audio. For the Target, you can select between FTP or Email. With
FTP you will need to enter the FTP server, username, password, path/directory,
filename prefix, interval, check Passive Mode and Apply to save. If you would
like to test the service click the Test button to see if it can connect the FTP
TV-IP762IC
33