Identification Plate; Engine Identification - Opel MOVANO Owner's Manual

Identification plate

The identification plate is located on
the right hand door pillar.
Information on identification plate:
1 : manufacturer's name
2 : certification number
3 : vehicle identification number
4 : permissible gross vehicle
weight rating in kg
5 : permissible gross train weight
in kg
6 : maximum permissible front axle
load in kg
7 : maximum permissible rear axle
load in kg
8 : engine type
9 : engine identification code
10 : fabrication number
11 : vehicle paint code
Note
The identification plate on your
vehicle may differ from the
illustration shown.
The combined total of front and rear
axle loads must not exceed the
permissible gross vehicle weight. For
example, if the front axle is bearing its
maximum permissible load, the rear
axle can only bear a load that is equal
to the gross vehicle weight minus the
front axle load.
Technical data
The technical data is determined in
accordance with European
Community standards. We reserve
the right to make modifications.
Specifications in the vehicle
documents always have priority over
those given in this manual.
Engine identifier code and engine
number
Stamped on the engine cylinder block
and on a label attached to the timing
chain cover, depending on variant.

Engine identification

The technical data tables show the
engine identifier code. Engine data
3 227.
To identify the respective engine,
refer to the engine power in the EEC
Certificate of Conformity provided
with your vehicle or other national
registration documents.
225