124
Climate control
Control units
The timer or remote control unit turns
the system on and off, and is used to
programme specific departure times.
Timer (Type A)
1 Display : Displays preset, current
time or preset time,
temperature, Y, Ö and x
2 l
: Adjusts values up
3 7
: Long press: switch
heater on, short press:
turns display on or
confirms selection
4 k
: Adjusts values down
5 d
: Long press: switch
heater off, short press:
turns display on or exit
menu
Remote control (Type A)
1 Display : Displays preset, current
time or preset time,
temperature, Z, Ü, Y,
Ö and x
2 7 : Long press: switch heater on,
short press: turns display on
or confirms selection
3 l : Adjusts values up
4 d : Long press: switch heater off,
short press: turns display on
or exit menu
5 k : Adjusts values down
If no buttons are pressed within
ten seconds the display automatically
turns off.
Remote control (Type A) fault
displays
INIT
: automatic detection –
wait until automatic
detection is finished
NO
: no signal –
SIGNAL
check heater fuse
: poor signal –
Z
move closer
: battery low –
Ü
replace battery
Y
: heater fault –
consult workshop
Add, AddE : system in learning
mode
Teach remote control (Type A)
If the vehicle battery is reconnected,
the LED in the instrument panel
button illuminates and the system