Load compartment light
1. Remove lamp assembly using a
flat blade screwdriver.
2. Detach wiring connector from
lamp assembly.
3. Remove lens cover and renew
bulb.
4. Install lens cover and attach
wiring connector to lamp
assembly.
5. Install lamp assembly.
Front door panel light
1. Remove lamp assembly using a
flat blade screwdriver.
2. Rotate bulb holder anti-clockwise
to disengage.
3. Renew bulb and insert the bulb
holder.
4. Install lamp assembly.
Rear courtesy lights
Have bulbs replaced by a workshop.
Glovebox light
Have bulbs replaced by a workshop.
Vehicle care
Instrument panel
illumination
Have bulbs replaced by a workshop.
193