Opel COMBO Owner's Manual page 166

164 Vehicle care
5. Screw the flexible filler hose onto
the tyre valve.
6. The switch on the compressor
must be set to J.
7. Connect the compressor plug to
the power outlet or cigarette
lighter socket.
To avoid discharging the vehicle
battery, we recommend running
the engine.
8. Set the rocker switch on the
compressor to I. The tyre is filled
with sealant.
9. All of the sealant is pumped into
the tyre. Then the tyre is inflated.
Tyre pressure 3 190. When the
correct pressure is obtained,
switch off the compressor.
10. If a pressure of 1.5 bar is not
obtained within five minutes,
remove the tyre repair kit. Move
the vehicle one tyre rotation.
Reattach the tyre repair kit and
continue the filling procedure for
five minutes. If a pressure of
1.8 bar is still not obtained within
five minutes, the tyre is too badly
damaged. Seek the assistance of
a workshop.
Do not run the compressor longer
than 20 minutes.
11. Detach the tyre repair kit.
12. Remove any excess sealant
using a cloth.
13. Take the label indicating
maximum permitted speed from
the sealant bottle and affix in the
driver's field of view.
14. Continue driving immediately so
that sealant is evenly distributed
in the tyre. After driving approx.
10 km (but no more than
ten minutes), stop and check tyre
pressure. Screw compressor air
hose directly onto tyre valve and
compressor when doing this.