Brother QL-810W User Manual page 38

Printing Using a Computer (P-touch Editor)
c
To use the computer or mobile device to select the SSID of the Label Printer, see step b of Wireless
Direct on page 24.
To configure the Infrastructure Mode settings of the Label Printer, see step c of Connecting the Label
Printer to your Wi-Fi access point/router on page 25.
WPS (Wi-Fi Protected Setup™)
If your Wi-Fi access point/router supports WPS, settings and connections can be configured quickly.
a
First, confirm that your Wi-Fi access point/router has the WPS symbol.
b
Place the Label Printer within the range of your Wi-Fi access point/router. The range may differ
depending on your environment. See the instructions provided with your Wi-Fi access point/router.
c
On the Label Printer:
For QL-810W

Press and hold the WPS Button for one second.
When the connection is established, The Wi-Fi ( ) LED is lit blue.
For QL-820NWB

a). Press the Menu and [▼] Buttons to select [WLAN] menu, and then press the [OK] Button.
b). Press the [▼] Button to select the [WPS Button Push] menu, and then press the [OK] Button.
When the connection is established, the WLAN icon appears on the Label Printer LCD.
Note
• Computers and mobile devices that are on the same network as the Label Printer will have access to the
Label Printer.
• The Label Printer will try to connect using WPS for two minutes. If the WPS Button (QL-810W) or [OK]
Button (QL-820NWB) is pressed during that time, the Label Printer will continue trying to connect for an
additional two minutes.
• You can also configure this using the PIN code.
2
2
27