Using The Battery Unit (Optional: Pa-Bu-001); Using The Battery Unit (Rechargeable Li-Ion Battery Included) - Brother QL-810W User Manual

Using the Battery Unit
22
(Optional: PA-BU-001)

Using the Battery Unit (Rechargeable Li-ion Battery included)

Charging the Battery Unit
Note
• Before use, you must charge the Battery Unit.
• To fully charge the Battery Unit, charge for approximately 2.5 hours.
a
Make sure the Battery Unit is installed in the Label Printer.
b
Use the AC Adapter and AC Power Cord to connect the Label Printer to an AC power outlet.
For QL-810W, the Battery (
Unit is fully charged.
For QL-820NWB, the Battery Power is shown on the LCD.
Note
If the Battery Unit is not fully charged and you use the Label Printer to print, feed, or perform another
operation, the Battery Unit temporarily stops charging, and continues automatically after the operation is
completed.
) LED lights in orange during charging, and it turns off when the Battery
22
22
22
198