A/C REMOTE CONTROL USER MANUAL The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. 2020550A9100...
QUICK START QUICK START 1. QUICK START 1. QUICK START SELECT MODE FIT BATTERIES [Auto/ Cool/ Dry/ Heat/ Fan] Step Step Step 5 SELECT TEMPERATURE POINT REMOTE TOWARD UNIT [17°C ~ 30°C] Step 4 Step 6 Step Step Step 3 SELECT FAN SPEED PRESS POWER BUTTON NOTE: The unit will operate on...
Page 3
DISPLAY BUTTONS 3. BUTTONS 2. DISPLAY UP Button( Mode display Press this button to increase the setting Displays the selected mode. temperature AUTO, COOL, DRY, HEAT Transmission Indicator This transmission indicator will light when remote DOWN Button( controller transmits signals to the indoor unit. Press this button to decrease the setting temperature Temp./Timer display...
Page 4
BUTTONS BUTTONS 3. BUTTONS 3. BUTTONS TIMER ON Button ( SELF CLEAN / IONIZER Button: Press this button to initiate the auto-on time Active/Disable SELF CLEAN function for each sequence. Each press will increase the auto- press. timed setting in 30 minutes increments. When Under SELF CLEAN mode, the air conditioner the setting time displays 10, each press will increase the auto-timed setting 60 minutes...
BUTTONS OPERATION 3. BOTTONS 4. OPERATION TURBO/SILENCE Button: Auto mode Active/Disable TURBO function for each press. Ensure the unit is plugg ed in and power is available. Turbo function enables the unit to reach the The OPERATION indicator on the display panel of preset temperature at cooling or heating the indoor unit starts flashing.
Page 6
OPERATION OPERATION 4. OPERATION 4. OPERATION Dry mode Timer OFF only This function will allow the unit to stop automatically Ensure the unit is plugged in and power is at the set time. The timer can be set while the unit is available.