Invacare Action3 Junior Service Manual page 36

SECTION 6—SEAT-TO-FLOOR HEIGHT
NOTE: In order to obtain the desired front seat to floor height, it will be necessary to
perform one or both of the following:
• Changing the castor size and/or mounting position on the fork, and/or seat angle
Refer to Removing/Installing/Repositioning the Castor Assemblies paragraph.
• Changing the fork size or adding/removing height adjustment spacers. Refer to
Adjusting Forks paragraph.
• Changing the rear wheel size. Refer to Removing/Installing Rear Wheels
paragraph.
• Changing the rear height positioning. Refer to Adjusting Rear Wheel Height
paragraph.
SEAT ANGLE 1.5°
REAR WHEEL
SEAT HEIGHT
20"
3
410 mm
435 mm 2
1
460 mm
SEAT ANGLE 5°
REAR WHEEL
SEAT HEIGHT
20"
4
410 mm
3
435 mm
2
460 mm
SEAT ANGLE 8.5°
REAR WHEEL
SEAT HEIGHT
20"
5
410 mm
4
435 mm
460 mm 3
CHANGING SEAT-TO-FLOOR HEIGHT
FRONT CASTOR
Position 1 Position 2
22" 5" 5"
4 N/A
3
3 2 N/A
2 1 2
FRONT CASTOR
Position 1 Position 2
22" 5" 5"
5 N/A
3
4 2 N/A
3 1 2
FRONT CASTOR
Position 1 Position 2
22" 5" 5"
N/A N/A
3
5 2 N/A
4 1 2
Front Castor Position 1 Front Castor Position 1
Front Castor Position 2
3 6
1
2