Invacare Action3 Junior Service Manual page 25

Axle Brackets
Axle Brackets
Hardware
Fixed Axle
NOTE: In order to obtain the desired front seat to floor height (for details, see Seat-to
Floor Height paragraph), it will be necessary to perform one or both of the following:
• Changing the mounting position on the fork. Refer to
Removing/Installing/Repositioning the Castor Assemblies paragraph.
• Changing the fork size or adding/removing height adjustment spacers. Refer to
Adjusting Forks paragraph.
• Changing the rear height positioning of the rear wheel and the front wheel.
1 = 435 mm
FIGURE 5.1 Removing/Installing Rear Wheels
SECTION 5—REAR WHEELS/FRONT CASTORS
Transit Brake
Washers
2 = 460 mm
1
2
2 5
Brake Hardware
(including locknuts)
Dust Cap
Locknut