Olympus E-620 Instruction Manual page 51

Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed.
~"EV
STEP" (P. 101)
Number of frames: 3
I
Menu
Setting display
MENU
~
[q]
~
[BRACKETING]
~
[AE BKT]
Viewfinder
Compensation range
• The exposure value for the remaining
frames blinks during shooting.
•
m
><
"C
o
1II
C
;
Start shooting.
• In single-frame shooting, the exposure changes every time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until the selected number of frames are
taken.
• Releasing the shutter button stops flash bracketing shooting. When it stops,
~
blinks in
the viewfinder and
~
is displayed in green on the super control panel.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P
mode : Aperture value and shutter speed
A
mode: Shutter speed
S
mode : Aperture value
M
mode: Shutter speed
fij
TIPS
To apply AE bracketing to the exposure value you have compensated:
~
Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
51
EN