Olympus E-620 Instruction Manual page 132

Exposure warning display
If the optimum exposure cannot be obtained when pressing the shutter button halfway, the
display will blink in the viewfinder and on the super control panel.
Shooting
mode
p
Warning display
example (blinking)
\ I /\ I /
,
, -,-,
- -,c,c,c, Fc c -
/ I \/ I \
Status
The subject is too dark.
The subject is too bright.
Action
• Increase the ISO sensitivity.
• Use the flash.
• Decrease the ISO sensitivity.
• Use a commercially available
NO filter (for adjusting the
amount of light).
A
s
\ I
I
-, " j,-
- .=,
CI -
F
'='.0
/ I \
\ I /
,
,
,.,-
,-
- -, c, c, c, r .=,.c,
/ I \
\ I /
,
-,-,
'- ,-,,-,.- F.- :-, -
,-
-
-,
-.-
/ I \
\ I /
" F-'-'
-, .-,
.-,.- .-
,- -
---, --
/ I \
The subject is underexposured. • Decrease the aperture value.
• Increase the ISO sensitivity.
The subject is overexposured. • Increase the aperture value.
• Decrease the ISO sensitivity or
use a commercially available
NO filter (for adjusting the
amount of light).
The subject is underexposured. • Set the shutter speed slower.
• Increase the ISO sensitivity.
The subject is overexposured. • Set the shutter speed faster.
• Decrease the ISO sensitivity or
use a commercially available
NO filter (for adjusting the
amount of light).
132
EN
*
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.