Scheduled Recording - Panasonic DMR-EH75V Operating Instructions Manual

DRIVE SELECT-
Numbered
__
buttons
Ill=
0=
PAGE A, V
CH, A, V
You can perform scheduled recording easily by just marking the
desired program(s) in the program listings.
For successful scheduled recordings
The program listings will not display immediately after purchasing
this unit. Complete the TV Guide On Screen ® system setup and
download the program listings (423).
Press [TV GUIDE].
If the program listings is not completely downloaded, the
"Display setup progress" screen is displayed.
Select "LISTINGS" using [_1, I_]. (You can use only the portion
of TV programs that downloaded).
Further instructions on utilizing the TV Guide On Screen ®
system 4 35
See also the notes "Important notes for recording" (4 9).
=You can enter up to 8 days in advance.
=The program name becomes the name of the recorded title if the
program is listed on the program listings.
=There may be some channels that are not displayed in the
program listings even if they are receivable. In this case set them
manually (4 33).
Program listings for satellite services other than DirecTV
cannot be received.
eCustomers using the DISH Network service can set
scheduled recordings on the DISH Network receiver
(4 below).
olf you are using another satellite service, you can use
manual recording to record.
DirecTV/DISH Network service is only available in the United
states.
Using the DISH Network service
Program scheduled recordings using the DISH Network receiver.
At this time, set the unit to the channel that receivers broadcasts
from the DISH Network receiver.
Press [CH, A, V] to select the appropriate channel on this unit.
Press [(_, DVDNHS POWER] to turn this unit off.
• Visit Gemstar's homepage for more information about scheduled
recordings for DISH Network.
URL: http:llwww.tvgos.comlsupportlechostarl
Preparation
oTurn on the television and select the appropriate video input to suit
the connections to this unit.
olf recording to DVD, insert a disc that you can use for recording
(4 12).
Press [A, _', _1, I_] to select the program.
• To skip one screen
Press [PAGE A] or [PAGE v].
Press [O, REC].
"" appears in the list to indicate that the program is set for
scheduled recording.
• Press [O, REC] to change the frequency.
Each time you press the button:
Records only once.
Records regularly.
Records weekly.
Off
oAs long as the setting is not changed, the program is recorded
to the HDD in the recording mode selected by the unit.
oTo change the setting
Press [SUB MENU] (4 36, To make scheduled recording,
step 2).
Repeat steps 2 to 3 to program other recordings.
Press [TV GUIDE].
Returns to the television screen.
When programming is finished and [TV GUIDE] is pressed
oThe unit goes to scheduled recording standby ("Q" lights on the unit's display); however, it may not turn off automatically. To save power, turn
the unit off by pressing [_, DVD/VHS POWER].
• Scheduled recordings are activated regardless of whether the unit is turned on/off.
oWhen using the cable box or the satellite receiver, make sure the cable box or the satellite receiver is turned on.
• Notes on scheduled recording --) 34
• To check, change or delete a program --) 34
• To cancel scheduled recording when it has already begun
Press [DRIVE SELECT] to select the recording drive.
Press [i, STOP] then press [4, 1_] to select "Stop recording" and then press [ENTER].
RQT8346