Calculation Examples; General Instructions; Printing Date/Time - Sharp el-2630piii Operation Manual

1. Set the decimal selector as specified in each example. The
rounding selector should be in the "5/4" position unless
otherwise specified.
2. The constant/add mode selector and grand total/rate setting
mode selector should be in the "•" position (off) unless
otherwise specified.
3. The print/item count mode selector should be in the "P"
position unless otherwise specified.
4. If an error is made while entering a number, press
and enter the correct number.
5. Negative values are printed with "–" symbol in red.
PRINTING DATE AND TIME
EXAMPLE: When on October 20, 2005, 1:52:00 p.m.
Operation
*1: If the date is not shown on the display, press
date.
24 | P a g e
Display
10-20-2005
0.
1-52 00 P
0.
Print
#10•20•2005•••••
"P"
#1•52
to show the
or