Philips DVDR1000 User Manual page 6

l Hold the RECORD key (on the recorder) or REC/OTR key (on the remote
control) pressed for about two seconds until 'SAFE RECORD' appears on the
display.
l The recorder automatically jumps to the end of the last title on the disc and starts
recording.
‰ If no free space is left. The display will show 'DISC FULL'. Safe record is not
possible then.
Recordings on DVD+R are always automatically made after the last title on the disc.
Quickly changing the record mode
An alternative way to select the record mode is available in the Index Picture Screen and
in tuner mode:
l Press SELECT repeatedly to choose the desired record mode.
‰ The new record mode appears on the screen and the display.
It is not possible to switch record modes during recording.
Camcorder recording date and time
If a recording was made from a digital camcorder using the i.LINK DV input, the original
recording date and time are automatically stored as DVD subtitles and in the Index
Picture Screen.
When playing this recorded DVD, press Z SUBTITLE to display the recording
l
date and time.
‰ The recording date and time are displayed in the right bottom corner of the
screen.
On-Screen Display during recording
l Press SYSTEM MENU during recording to bring back the OSD or to remove it
again.
- 6 -