Introduction This CD-ROM disc contains a firmware upgrade for first-generation Philips DVD recorders that adds DVD+R recording as well as several other interesting functions. It can be used with the following models: - DVDR1000/001 - DVDR1000/002 - DVDR1000/021 - DVDR1000/022...
Page 4
‰ If the display shows ‘DVD+R UNSUP’, DVD+R recording will not yet be possible your DVD recorder needs to be serviced. For this, contact your dealer or the Philips Customer Care Center. The other new features will work. ‰ If the display shows ‘REMOVE DISC ’, the upgrade is complete. DVD+R recording as well as the other new features are available.
Dividing titles is not possible. DVD+R discs must be finalized before they can be played on regular DVD players. After finalization no more changes can be made. Thanks to Philips Ultra Finalization the disc will be ready in one minute.
Page 6
Hold the RECORD key (on the recorder) or REC/OTR key (on the remote control) pressed for about two seconds until ‘SAFE RECORD’ appears on the display. The recorder automatically jumps to the end of the last title on the disc and starts recording.
Page 7
Optimizing the video output (only available in North America) The Progressive Scan video output is always active in parallel with the other video outputs. With an extra option in the picture settings menu of the User Preference menu, you can optimize the video output for either Progressive Scan or regular non- progressive (interlaced) displays.
CD-ROM. You cannot upgrade with the disc. The display shows ‘SYS UNSUPP’. Upgrading is not supported for this configuration. Contact your Philips Customer Care Center. The display shows ‘ERROR’ or An error occurred during the upgrade ‘ENGINE ERROR’.