Philips DVDR1000 User Manual page 4

Upgrade procedure - Read this before you
start
The complete upgrade procedure consists of TWO STAGES , and takes +/- 20
minutes.
Stage 1:
1 Press OPEN/CLOSE to open the tray.
2 Insert the upgrade CD-ROM disc, label side up.
3 Press OPEN/CLOSE to close the tray.
‰ First 'READING 'appears on the display, followed by 'DOWNLOAD '. This stage of
the procedure takes +/- 15 minutes.
‰ If the firmware was already updated, the display will show 'UP TO DATE '
within a few seconds.
4 When the upgrade is completed the tray will open automatically.
‰ The display shows 'TRAY OPEN '.
IMPORTANT: DO NOT REMOVE THE DISC AFTER STAGE 1!
Stage 2:
5 In case the tray is still open, press OPEN/CLOSE to close the tray.
In case the recorder already went to standby, simply press STANDBY/ON.
‰ First 'READING 'appears on the display, followed by 'DOWNLOAD '. This stage of
the procedure takes +/- 5 minutes.
6 When the downloading is completed the tray will open automatically.
‰ If the display shows 'DVD+R UNSUP', DVD+R recording will not yet be possible
your DVD recorder needs to be serviced. For this, contact your dealer or the
Philips Customer Care Center. The other new features will work.
‰ If the display shows 'REMOVE DISC ', the upgrade is complete. DVD+R
recording as well as the other new features are available.
7 Now remove the disc.
8 Press STANDBY/ON to switch off the recorder.
- 4 -