Note On Mounting The Gears; Caution Point On The Pwb If-114 - Sony DVP-NC875V Service Manual

DVP-NC875V
4.

NOTE ON MOUNTING THE GEARS

1) Mount the gear (chuck). (See Fig. 5)
2) Rotate the gear (chuck) in the direction of the arrow. (down
position) (See Fig. 5)
3) Connect the boss of the gear (swing) with the groove of the
rotary encoder and mount the gear (swing). (See Fig. 6)
4) Align triangle mark of the chassis with the groove of the gear
(swing). (See Fig. 6)
Fig. 5.
Fig. 6.
5) Mount the while aligning the engagement of the gear (swing)
and the gear (chuck). (See Fig. 7)
5.

Caution Point on the PWB IF-114

CAUTION
When handling IF-114 PWB avoid contact with the sharp metal
edge on the top side of Vacuum Fluorescent Display (ND401).
— 6E — — 6 —
Fig. 7.