Sharp MX-M904 Installation Manual page 6

B. Fixing tape and protection material removal
1) Remove the fixing tape and the protection material.
2) Open the front cover.
3) Remove the protection sheet and the Operation Manual.
MX-M1204 MX-M904/M1054/M1204 (MAIN UNIT) 2 – 5
4) Remove the screw (a), and remove the cover (b).
5) Remove the protection material. (Packing material for fixing
the separation pawls)
NOTE: When moving the machine again after unpacking, be
sure to attach the protection material. (If not, the OPC
drum may be damaged.)
6) Pull out the intermediate frame.
a
b
a