Epson PictureMate Pal User Manual page 71

■
Make sure your paper isn't damp or curled, or loaded face down (load it glossy
side up). If it's damp or curled, load new paper.
■
The print head may need cleaning; see Improving Print Quality for instructions.
■
The print head may need aligning; see Improving Print Quality for instructions.
■
Remove each photo from the output tray after printing. Let each photo sit for a
minute before handling it.
Your photo is grainy.
■
The print head may need aligning; see Improving Print Quality for instructions.
■
You may need to increase the image resolution or print it in a smaller size; see
your software documentation.
Your photo is faint or has gaps in the image.
■
The print head may need cleaning; see Improving Print Quality for instructions.
■
The Print Pack may be old or low. See Replacing the Print Pack for instructions
on replacing it.
■
Make sure your paper isn't damaged, old, dirty, or loaded face down. If it is, load
new paper with the glossy side up.
Colors in your photo are wrong or missing.
■
If you are printing directly from PictureMate Pal, press
Color Effect is not set to
Black and White or Sepia.
■
If you are printing from your computer, make sure the Color Option is not set to
Black and White
■
The print head may need cleaning; see Improving Print Quality for instructions.
■
The Print Pack may be old or low. See Replacing the Print Pack for instructions
on replacing it.
■
Colors may change slightly after your print dries. Wait for 24 hours and check
your photo again.
■
Make sure your software is set for color printing.
or
Sepia Black and White
or . See Printing From Your Computer.
Sepia
and make sure
Menu
. See Printing Photos in
71