Epson PictureMate Pal User Manual page 66

Message
Close the cartridge door.
No cartridge installed.
Insert cartridge now.
Cartridge not
recognized. Replace
Print Pack.
No photos on memory
card.
Memory card not
recognized.
Error in data. Printouts
may be affected.
Bluetooth adapter error.
The image is too large.
The image is too
complex.
External device not
recognized.
Printer error.
Service required.
66
What to Do
The cartridge door is not closed completely on the back of
PictureMate Pal. Make sure the door clicks shut.
The photo cartridge was removed or not installed correctly.
Install a new photo cartridge. See Replacing the Print Pack.
Install a genuine PictureMate 200 Series photo cartridge.
See Replacing the Print Pack.
No compatible photos are on the inserted memory card.
Insert a card with photos or one with compatible file types.
See Photo Image File Requirements.
Use a compatible memory card. Format the card with your
camera, not a computer. See Compatible Memory Cards
and the supported file types in Photo Image File
Requirements.
Data in your photo files may be corrupted and may affect
your printouts.
Disconnect the adapter, then reconnect it to PictureMate
Pal. See Printing Wirelessly From a Bluetooth Device.
The image you are trying to print from a Bluetooth device is
too large. Print the photo from a memory card or your
computer instead.
The image you are trying to print from a Bluetooth device is
too complex. Print the photo from a memory card or your
computer instead.
An unsupported device is connected to the
back of PictureMate Pal. Disconnect the device.
Turn off PictureMate Pal, wait a few seconds, then turn it
on again. If the error does not clear, contact Epson as
described in Where To Get Help.
Parts inside PictureMate Pal are near or at the end of their
service life. Contact Epson as described in Where To Get
Help.
port on the