Epson PictureMate Pal User Manual page 68

■
If you're printing over a network, see Setting Up Network Printing for
instructions on configuring your PictureMate Pal software for use on a network.
■
If you have a previous version of the PictureMate Pal software installed, make sure
you uninstall it before installing the software for PictureMate Pal. See
Uninstalling PictureMate Pal Software.
Printing and Operation Problems
The light and photo viewer screen don't turn on.
On
■
Press the
■
Make sure the power cable and AC adapter are securely connected at both ends.
■
Make sure your power outlet works and is not controlled by a wall switch or
timer.
PictureMate Pal is on, but nothing prints.
■
If you're printing from your computer, make sure the USB cable is connected
securely at both ends and that the cable meets the requirements in System
Requirements.
■
If you're printing on a network, see Setting Up Network Printing for instructions
on configuring your PictureMate Pal software for use on a network.
The photo viewer screen goes blank.
The screen turns off after 13 minutes if PictureMate Pal is not used. Press any button
to turn it back on.
PictureMate Pal sounds as though it is printing, but nothing prints.
■
PictureMate Pal may be preparing to print.
■
The print head nozzles may need cleaning; see Improving Print Quality.
■
PictureMate Pal won't operate properly if it's tilted or at an angle. Place it on a
flat, stable surface.
■
Make sure paper is not jammed and is loaded correctly, and make sure the handle
is not resting on the paper; see Loading Paper.
68
button again to turn on PictureMate Pal.
On