Alarm Mode - Grundig Ocean Boy 70 Instructions Manual

:
1 7 3 9
e
:
1 9 9 6
e
:
6 3 0
:
1 2 4 9
:
5 5 0
:
6 2 0
24
OPERATION
Displaying the current time
Press »MODE« to briefly display the time.
1
– The display changes from the frequency to the time and back.

Alarm mode

Alarm with signal tone
Press »ON/OFF« to switch off the device.
1
Set the alarm signal tone (»e«) on the right of the device using
2
3 Press »ALARM« to select the alarm function.
– Display: the current time and »e«.
Briefly press »MODE« to check the alarm time.
4
– Display: the set alarm time, »e« flashes.
– After a short time, the display changes to the current time, »e« no
longer flashes.
– The alarm goes on with a signal tone at the set time.
Alarm with radio station
Press »ON/OFF« to switch on the device.
1
2 Select the radio alarm (»
Select the station using the preset buttons
3
and the preset buttons
Set the alarm volume using
4
Press »ON/OFF« to switch off the device.
5
6 Press »ALARM« to select the alarm function.
– Display: the current time and »
Briefly press »MODE« to check the alarm time.
7
– Display: the set alarm time, »
– After a short time, the display changes to the current time, »
longer flashes.
– The radio switches on at the set alarm time.
Briefly displaying the alarm time
With the device switched off, press »MODE«.
1
– The display changes from the clock to the set alarm time.
– Display: »e« or »
– After a short time, the display changes back to the current time.
_______________________________________________
«) on the right of the device using
»1/6 ...
5/10«.
»– VOLUME
«.
« flashes.
« flash.
»e
»e
»1/6 ... 5/10« or »+
+«.
«.
«.
10«
« no