JVC LT-26WX84 Service Manual page 7

2.2.1.2 SPECIFICATIONS
The following table shows the specifications of this unit.
Item
Maximum dimensions ( W × H × D )
Weight
Effective screen size
Aspect ratio
Drive device/ system
Resolution
Pixel pitch (pixel size)
Displayed color
Brightness
Contrast ratio
Response time
View angle
2.2.1.3 PIXEL FAULT
There are three pixel faults - bright fault , dark fault and flicker fault - that are respectively defined as follows.
(1) BRIGHT FAULT
In this pixel fault, a cell that should not light originally is lighting on and off.
For checking this pixel fault, input ALL BLACK SCREEN and find out the cell that is lighting on and off.
(2) DARK FAULT
In this pixel fault, a cell that should light originally is not lighting or lighting with the brightness twice as brighter as originally lighting.
For checking this pixel fault, input 100% of each R/G/B colour and find out the cell that is not lighting.
(3) FLICKER FAULT
In the pixel fault, a cell that should light originally or not light originally is flashing on and off.
For checking this pixel fault, input ALL BLACK SCREEN signal or 100% of each RGB colour and find out the cell that is flashing on
and off.
Specifications
62.7cm × 38.9cm × 4.9cm
8.0kg
Diagonal : 66cm (H:33.9cm × V : 56.6cm)
15:9
a-Si-TFT, active matrix system
Horizontally 1280 × Vertically 768 × RGB <W-XGA>
Horizontally:0.4425mm, Vertically:0.4425mm
16777216 colors
2
450cd/m
500:1
16.7ms
Vertically 170°, horizontally 170°
Remarks
26V type
2949120 dots in total
256 colors for R, G, and B
2
500cd/m at maximum
(No.YA089)1-7