JVC LT-26WX84 Service Manual page 56

5.1.7 DISPLAY METHOD WHEN RASTER IS NOT AVAILABLE
When raster is not displayed due to failure of the set, the POWER LED light will flash to indicate the ailure mode. Trigger for forced
shutdown of power is stored and displayed.
Trigger of error
LOW B LINE SHORT PROTECTION
DEFECTIVE AUDIO OUTPUT PART
Details on Operation
Power of TV will be turned off when NG is detected for LOW B short Protection". "POWER LED" will start flashing immediately after
power is turned off and power of tuner and panel cannot be turned on upon shutdown until the AC plugs are disconnected once and
reconnected.
1-56 (No.YA089)
Display
LOB
AP1
AP2
LED flash cycle of display unit
Blue every 1.0 sec
Blue every 0.1 sec
Blue every 0.5 sec