JVC LT-26WX84 Service Manual page 15

3.1.8 REMOVING THE POWER PWB
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
• Remove the POWER CORD.
• Remove the RECEIVER PWB.
(1) Remove the 4 screws [X], and remove the AV JACK
BRACKET.
(2) Remove the 6 screws [Y], and remove the POWER PWB.
(3) Remove the 6 screws [Z], and remove the CHASSIS
BASE.
3.1.9 REMOVING THE SPEAKER
• Remove the STAND.
• Remove the REAR COVER.
• Remove the POWER CORD.
(1) Remove the 5 screws [a], and remove the SPEAKER BOX.
(2) Remove the 4 screws [b], and remove the SPEAKER (L /
R).
(3) Remove the 4 screws [c], and remove the DUCT COVER/
DUCT BASE.
NOTE:
Since the speaker is attached in a certain direction, attach the
speaker in the same correct direction as it has been attached.
Y
P Q
AV JACK
BRACKET
X
Fig.3-1-8
a
Fig.3-1-9A
DUCT BASE/DUCT COVER
c
b
Fig.3-1-9B
Y
POWER PWB
Z
CHASSIS BASE
Z
a
SPEAKER BOX
c
b
SPEAKER(L)
SPEAKER(R)
(No.YA089)1-15