FEATURES
Overall
1, Each of the three types of stereo mixers have two
stereo input channels, which accept phono inputs
and tape/aux inputs, and are designed
to
be more
compact than ever before despite the number of
Inputs
provided,
WR-S208
WR-S212
WR-S216
Mic
x8
x12
x16
Phono
x2
x2
x2
Tape/Aux
x2
x2
x2
The WR-S208 has the same number of
inputs
as
a
12-input mixer.
The WR-S212 has the same number of inputs as
a 16-input mixer.
The WR
-$
216
has the same num be r of Inputs as
a
20-input mixer.
2. Separate microphone and line inputs are provided,
eliminating the
need for
repatchlng,
Both
microphone and line inputs are electronically
balanced.
3
,
The three send circuits can be used for effects and
monitoring,
further
widening the
range
of
a
ppl icatlons.
Monitor output:
E Hect output:
Send output:
Pre-fader level
Post-fade r level
Pre-/post-fader level
(switchable)
4
_
Stereo output circuits (Sub A and
Bl
and one mono
output (Main) circuit are provided
,
The main out IS
the combination of Sub A and Sub B output signals.
This signal can be derived pre- or post- sub output
fader,
r---~!$J
S
ub
B
A Pre
Fader
A Post
L=~~,e~~>-'W'--.J-!>
-~"--
-
-
0'
Main
BPost
XJ-------v-~
mr'
5. A phantom power supply of
+
48 V is provided for
condenser microphones.
6. Aluminum diecast end panels insure mechanical
stability.
7
.
The WR-S208 can be mounted in a rack, using op-
tional rack fittings.
- 1 -
8, The semi-modular
input
structure combining four
channels together eases repair and testing.
Mono Input Section
1. Exclusive microphone Input connectors and line
In-
put jacks are provided,
Microphone/line input selection is accomplished
With
mechanically-interlocked
pushbutton
switches
.
2. Three-band equalizers are provided. Turnover fre-
quencies are
10kHz,
400
Hz
-
6
.
3
kHz
(sweepable),
and 100 Hz for High, Mid, and Low
respectivr.ly.
High:
Shelving type ± 1 5 dB
Mid:
Peaking type ± 1 5 dB
Low
Shelving type ± 1 5 dB
3.
A peak Indicator LED is provided for each Input for
monitoring input signal level,
4. Each Input is prOVided with a solo switch for in-
dividual monitoring
.
5. An insertion circuit is provided for connecting ef-
fects devices to individual input channels,
6
.
Three send circuits are provided
.
Monitor:
Pre-fader level
Effect
:
Post-fader level
Send
:
Stereo Input Section
Pre-fader level/post fader
level (selectable)
1. A microphone input connector, phono input
jacks,
and tape/aux input Jacks are provided so that patch
work is no longer necessary.
2, Phono and tape/aux input levels can be
In-
dependently controlled.
3, The microphone
input
has a separate on/off switch.
4
.
A Mono/Stereo selector
s~itch
is included on
Stereo input channels,
5. Two-band stereo equalizers are provided with turn-
over frequencies of 10kHz (High) and 100 Hz
(Low),
High
:
Low
:
Shelving type ± 15 dB
Shelving type ± 15 dB
6, Two send Circuits are provided,
Monitor:
Pre-fade r level
Effect:
Post-fader level
7
.
A monaural solo switch is provided for
input
man itoring.
8. Peak indicator LEOs are prOVided for monitoring in-
put signal level.