Package Contents; Description; Intended Use; Electrical Safety - Stanley POP PB3400 Instruction Manual

E N G L I S H
Do not incinerate the battery pack.
Charges Li-Ion battery packs.
See Technical Data for charging time.
Only for indoor use.
1 7 P . a k c a g e o c n
The package contains:
1 PB2500 tool with nose piece size ø 6.4 [1/4"]
1 Charger 20 V max.
1 Battery 18 V Lithium Ion
1 Instruction Manual
NOTE:
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand
this manual prior to operation.
Components Fig. 1 , 2 & 3
A. Nose Pieces
B. Nose housing
C. Nose housing nut
D. Collector lock
E. Collector shutter
F. Hook hole
G. Motor housing
H. Exhaust vent
I. Handle
J. Switch
K. Battery Pack 1.5/2.0 Ah
K2. Battery Pack 3.0 Ah
M. Manual
O. Charger lamp
P. Charger
Q. Battery charger connection
Components Fig. 4, 5, 6, 7, 8, 9 & 10
R. Jaw guide
S. Jaws
T. Jaw pusher
12
e t n s t
g. 1)
U. Jaw pusher spring
V. Pulling head
W. Jaw case lock
X. Mandrel collector
Y. Blind rivet
Z. Tail guide
AA. Spindle clutch
AB. Spindle clutch spring
AC. Pulling head assembly
AD. Spindle
AE. Gear housing

19. INTENDED USE

This blind riveting power tool is designed for
professional blind rivet setting applications.
WARNING: Never modify the power tool or
any part of it. Damage or personal injury
could result.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities, or for lack
of experience and/or for want of knowledge
responsible for their safety. Children should never
be left alone to play with this product.
2 . 0 l E c e i r t a c S l a
The electric motor has been designed for one voltage
only. Always check that the battery pack voltage
corresponds to the voltage on the rating plate.
Also make sure that the voltage of your charger
corresponds to that of your mains.
Your POP® charger is double insulated in
accordance with EN 60335; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced by
service organisation.
2 . 1 U s n i g a n E x e t
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
e f y t
s n o i n C a b e l