IBM i series Handbook page 146

iSeries Server 270
The configurator determines which feature combinations will be on the order based on the
System Console #5540, #5544, #5546, or #5548 specify code.
• Hot plug PCI capability on the #2434 processor.
The following must be purchased:
• Processor (one must be specified). Processor performance CPW is in list
– #2431 processor (465 CPW)
– #2432 processor (1070 CPW)
– #2434 2-way processor (2350 CPW)
• Interactive Feature. Use this processor/interactive feature table for the 270 server.
Processor Feature
Interactive Feature
#1516
#1518
#1519
#1520
Note : An interactive value of zero supports system administrative functions.
• Main Storage (see "Main Storage" on page 120 for minimum memory requirements)
– Processors #2431, #2432, or #2452
• #3032 - 256 MB Main Storage (DDR technology)
• #3033 - 512 MB Main Storage (DDR technology)
• #3034 - 1 GB Main Storage (DDR technology)
– Processors #2434 and #2454
• #3022 - 128 MB Main Storage (64 Mb technology)
• #3024 - 256 MB Main Storage (128 Mb technology)
• #3025 - 512 MB Main Storage (128 Mb technology)
• #3026 - 512 MB Main Storage (256 Mb technology)
• #3027 - 1 GB Main Storage (256 Mb technology)
• #3029 - 128 MB Main Storage (128 Mb technology)
Note that feature codes #3025 and #3026 or #3022 and #3029 cannot be mixed within
pairs or quads.
• PCI Disk Unit Controller.
The #9767 Base Disk Unit Controller may optionally be replaced with one of the following:
– #2763 PCI RAID Disk Unit Controller
Provides support for up to 12 Disk Units, the required CD-ROM/DVD-RAM, and either
a feature Internal Tape, feature CD-ROM, or feature DVD-RAM.
116
iSeries Handbook
#2431 #2432
-
30
-
-
#2434
0
-
50
- 70
0
-
-