Static Routing - D-Link DFL-600 Manual

Hide thumbs Also See for DFL-600:

Table of Contents

Static Routing

Your DFL-600 can automatically discover routes to destinations on both your

LAN and the WAN (Internet). In addition, you can add entries to the DFL-

600's routing table that will be saved to flash RAM. These routes will not

age out, and are therefore static.

Destination IP

Network

down menu. Selecting one of the listed

applications is the equivalent of entering the

correct settings in the fields above for the

specific application. For example, the

Netmeeting application requires a Trigger Port

Range of 1720 – 1720, a Trigger Type of TCP,

and so on. The correct settings for the

applications listed in this drop-down menu have

been entered into the DFL-600's firmware, for

your convenience.

This is the IP address of the remote network that

the DFL-600 will route service requests to.

Table of Contents