D-Link DFL-600 Manual page 41

Hide thumbs Also See for DFL-600:

Table of Contents

If you have some PCs (or other network devices) that do not require RADIUS

user authentication to access the WAN (Internet), you can enable 802.1x, and

then enter the IP Address and IP (subnet) Mask of these devices under the

Edit link (which will appear when you enable 802.1x). PCs and network

devices that have their IP Address and IP (subnet) Mask entered on the

802.1x Device Configuration page will be allowed to access the WAN

(Internet) by the DFL-600 without any RADIUS user authentication,

effectively bypassing the RADIUS user authentication step.

Clicking the RADIUS click box will open the following page:

Table of Contents