Drum Section - Kyocera FS-1060DN Service Manual

2-1-2 Drum section

The drum section consists of the charger roller, drum and cleaning section. The drum is electrically charged
uniformly by means of a charger roller to form a latent image on the surface. The cleaning section consists of
the cleaning blade and the drum screw which remove residual toner from the drum surface after transfer. The
eraser lamp (ELPWB) consists of LEDs and removes residual charge on the drum before main charging.
Drum unit
5
1
Figure 2-1-4 Drum section
1. Drum
2. Charger roller
3. Drum frame
ELPWB
Figure 2-1-5 Drum section block diagram
3
4
2
4. Cleaning blade
5. Drum screw
6. Eraser lamp (ELPWB)
Main charger output
HVPWB
2-1-4
6
ERASER
YC20-2
M
YC13
MPWB
2M2/2M3