Paper Misfeed Detection Condition - Kyocera FS-1060DN Service Manual

(2) Paper misfeed detection condition

20/21 ppm model
RS
Code
0111 Rear cover open
0508 No paper feed from duplex
section(25/26ppm model)
0511 Multiple sheets in cassette
0518 Multiple sheets in duplex
section(25/26ppm model)
4020 Registration sensor on
(Power up or warm up)
4201 Duplex sensor non arrival
jam(25/26ppm model)
4208 Duplex sensor non arrival
jam(25/26ppm model)
4211 Duplex sensor stay jam(25/
26ppm model)
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
Figure 1-4-2 Paper jam location
Contents
Cover is opened during printing.
Registration sensor (RS) does not turn on in 2.4
seconds after the duplex sensor (DUS) has turned
on, during paper is feed from the duplex section.
Registration sensor (RS) does not turn off in (3.4/
2.7)*1 seconds after the registration sensor (RS)
has turned on, during paper is feed from the cas-
sette or MF tray.
Registration sensor (RS) does not turn off in 2.7
seconds after the registration sensor (RS) has
turned on, during paper is feed from the duplex
section.
Duplex sensor (DUS) does not turn on in 1.0 sec-
onds after the registration sensor (RS) has turned
on, during paper is feed from the cassette or MF
tray.
Duplex sensor (DUS) does not turn on in 1.0 sec-
onds after the registration sensor (RS) has turned
on, during paper is feed from the cassette or MF
tray.
Duplex sensor (DUS) does not turn on in 1.0 sec-
onds after the registration sensor (RS) has turned
on, during paper is feed from the duplex section.
Duplex sensor (DUS) does not turn off in 1.0 sec-
onds after the registration sensor (RS) has turned
off, during paper is feed from the cassette or MF
tray.
25/26 ppm model
DUS
RS
Conditions
1-4-2
2M2/2M3
Jam
location*
-
A
B
B
B
B,C
A
A