Customizing The Data Application - Raymarine gS Series Installation And Operation Instructions Manual

19.4 Customizing the data application

You can customize the data application to show the system and
instrument data that you require.
In addition to displaying the default, pre-configured datapages in
the data application, you can also:
• Change the order datapages appear.
• Customize datapages content to your specific requirements.
• Rename the datapages.
• Add new custom datapages.
• Delete existing datapages.
• Set boat details such as number of engines, fuel tanks, and
batteries.
• Set the maximum engine RPM range.
• Change color theme.
• Change the units of measurement.
• Reset minimum and maximum readings.
• Reset all pages to default.
Changing datapage order
You can change the order that datapages appear.
From the data application:
1. Scroll to the datapage you want to move.
2. Select Menu.
3. Select Edit Page.
The edit page menu is displayed.
4. Select Move Page Up or Move Page Down.
Each time move page up or move page down is selected
the datapage will be moved 1 space up or down in the data
application.
Customizing datapage content using
touch
On touchscreen multifunction displays you can customize a data
item by pressing and holding on the item onscreen.
From the Data application:
1. Display the datapage that contains the data item you want
to change.
2. Touch and hold your finger on the data item.
After approximately 3 seconds the data item is highlighted
and the Select Data Category menu is displayed.
3. Navigate the menu to locate the data item you want to use.
4. Select the data item.
The selected data item is now displayed in place of the
original data item.
Customizing datapage content
From the data application:
1. Select Menu.
2. Select Edit Page.
3. Select the cell you want to change.
4. Select Select Data Category.
5. Select a data category.
Selecting a data category will display a list of data items for
that category.
6. Select the data item you want to display.
Once selected a tick will be placed next to the data item in the
menu and the cell on screen will display the new data item
7. Repeat steps 3 to 6 for all the data items you want to change.
Renaming a datapage
From the data application:
1. Select Menu.
2. Select Edit Page.
3. Select Rename Page.
The on screen keyboard is displayed.
Data application
4. Enter the new name for the datapage.
5. Select SAVE.
Adding a new datapage
You can add your own customized datapages to the data
application. The total number of datapages including
pre-configured pages is 10.
From the data application:
1. Select Menu.
2. Select Create New Page.
A list of available page layouts is displayed.
3. Select the required page layout.
The new page is displayed on screen.
4. Select the blank cell on the new page layout that you want
to add a data item to.
5. Select Select Data Category.
6. Select a data category.
Selecting a data category will display a list of data items for
that category.
7. Select the data item you want to display.
Once selected a tick will be placed next to the data item in
the menu and the cell on screen will display the selected
data item.
8. Repeat steps 3 to 6 for all the data items you want to change.
9. Select Rename Page.
The on screen keyboard is displayed.
10. Enter the new name for the datapage.
11. Select SAVE.
Deleting a datapage
You can delete custom or pre-configured datapages from the
data application. The minimum number of datapages allowed
is 1.
From the data application:
1. Scroll to the datapage you want to delete.
2. Select Menu.
3. Select Delete Page.
The confirm delete pop up message is displayed.
4. Select Yes to delete the datapage, or No to cancel the action.
Note: You cannot create a new engine page with the same
layout as the pre-configured engine datapages.
Setting boat details
You can change vessel settings from the Data application menu.
From the Data application:
1. Select Menu.
2. Select Boat Details.
3. Select Num. of Engines, Num. of Fuel Tanks, or Num.
of Batteries.
4. Select either 1, 2, 3, 4 or 5.
If the number of engines has been changed then the Engine
datapage will be reset to display the correct number of
engines.
231