My Data Options; Multiple Chart Synchronization - Raymarine gS Series Installation And Operation Instructions Manual

16.16 My Data options

The My Data menu provides access to your user data.
The options are found in the My Data menu: Menu > My Data.
• Waypoints — View the waypoints group list.
• Routes — View the Routes list.
• Tracks — View the Tracks list.
Refer to Chapter 15 Waypoints, Routes and Tracks
details.
178

16.17 Multiple chart synchronization

You can synchronize the heading, range, and position
information across multiple chart views and networked displays.
When chart synchronization is enabled:
• It is indicated by "CHRT Sync" in the chart application title bar.
• Any changes made to the heading, range or position in any
chart instance will be reflected in all other chart instances.
for further
Note: When the 2D and 3D chart views are synchronized, the
Motion Mode is always Relative Motion.
Synchronizing multiple chart instances
From the chart application:
1. Select Menu.
2. Select Presentation.
3. Select Chart Sync.
4. Select Chart from the list.
A tick is placed next to the selected option.
5. Repeat the steps above for each chart instance and if
required on each networked multifunction display you want
to sync the chart view.
Note: You cannot sync to another chart if radar sync is turned
on.
gS Series