Precaution On System Configuration; Software Package - Mitsubishi Q-Series User Manual

2 SYSTEM CONFIGURATION

2.2 Precaution on System Configuration

2 - 6
This section describes hardware and software packages compatible with Basic model
QCPU.
(1) Hardware
(a) The number of modules to be installed and functions are limited depending on
the type of the modules.
Applicable Module
Q Series MELSECNET/H
network module
Q series Ethernet interface
module
Q series CC-Link system
master local module
Interrupt module
(b) A graphic operation terminal can be used only for the GOT900 series and
F900 series (Basic OS matching Q-mode and communication driver must be
installed).
The GOT800 series, A77GOT, and A64GOT cannot be used.
(c) A DeviceNet Master-Slave module (QJ71DN91) whose function version is B
or later can be used.

(2) Software package

GX Developer and GX Configurator of the versions or later in the following table
are usable with the Basic model QCPU.
Product Name
GX Developer
GX Simulator
GX Configurator-AD
GX Configurator-DA
GX Configurator-SC
GX Configurator-CT
GX Configurator-TC
GX Configurator-FL
GX Configurator-DN
GX Configurator-TI
GX Configurator-PT
GX Configurator-QP
Type
QJ71LP21, QJ71BR11, QJ71LP21-25,
QJ71LP21G, QJ71LP21GE
QJ71E71, QJ71E71-B2, QJ71E71-100
QJ61BT11
QI60
Type
SW7D5C-GPPW-E
SW6D5C-LLT-E
SW0D5C-QADU-E
SW0D5C-QDAU-E
SW0D5C-QSCU-E
SW0D5C-QCTU-E
SW0D5C-QTCU-E
SW0D5C-QFLU-E
SW0D5C-QDNU-E
SW0D5C-QTIU-E
SW1D5C-QPTU-E
SW2D5C-QD75P-E
MELSEC-Q
Limit of number of
modules to be installed
One module only
One module only
Up to 2 modules
function version B or
later
One module only
Version
Ver. 7
Ver. 6
Ver. 1.10L
Ver. 1.10L
Ver. 1.10L
Ver. 1.10L
Ver. 1.10L
Ver. 1.10L
Ver. 1.10L
Ver. 1.10L
Ver. 1.10L
Ver. 2.10L
2 - 6