Before You Begin - Speedaire 40HU29 Instructions Manual

BEFORE YOU BEGIN

Introduction
The Speedaire line of basic horizontal rotary screw compressors are simple to setup, use, and maintain and will
provide you with years of trouble free operation.
Basic Horizontal Rotary Screw Models:
• Integrated Compressor Pump
• ASME air receiver with safety valve
• Electric motor
• Belt Tensioning System
• Oil Cooler
• IEC Motor Starters
• Oil
Quick Reference
Recommended Oil (2 Options)
Single viscosity ISO46 rotary screw compressor oil (part number 40HU83 - 1 gallon
container). Available from Grainger at www.grainger.com
Oil Capacity
1.5 gallons for 5 HP to 15 HP. 2.1 gallons for 20 HP to 25 HP.
UNPACKING
tubes or coolers. Do not use unit to lift other attached equipment.
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts. Check to be sure all supplied accessories are enclosed with the unit. In case of
questions, damaged or missing parts, please call 1-855-504-5678 for customer assistance.
Required Items - Not Included
• Oil
Do not lift or move unit without appropriately rated equipment. Be sure
the unit is securely attached to lifting device used. Do not lift unit by holding onto
Do not operate unit if damaged during shipping, handling or use. Damage
may result in bursting and cause injury or property damage.
1